UPGRADE from CORE to TUNER

DX2 CORE to TUNER Complete Software Upgrade

Permanently upgrade your existing DX2 CORE directly to the complete DX2 TUNER version in one purchase.

The DX2 is fully software-upgradeable at any time. This complete upgrade includes every DX2 PRO feature together with the full CAN Bus, OBD and UDS development environment. You do not need to purchase the CORE to PRO upgrade separately.

The complete PRO and TUNER functions are activated on your existing CORE display without replacing the display or purchasing additional hardware.

No computer is required for setup, configuration or data discovery. Individual gear shift points, engine-data gauges, alarms, analog sensors, CAN messages, OBD and UDS requests, graphs and custom profiles can all be created and edited directly from its touchscreen.

PRO Features Unlocked

• Launch Control detection program
• Individual RPM shift points for each gear
• Advanced RGB shift-light configuration
• Multiple configurable shift-light behaviours
• Live engine-data monitoring
• Up to 12 supported data channels
• Configurable engine-data gauge pages
• Custom gauge assignments and placement
• Configurable warning thresholds
• Visual display alarms
• RGB shift-light alarm indication
• Vehicle-specific CAN, OBD and UDS data
• Additional Race & Rally-inspired layouts

Standalone Analog Sequential Gearbox Input

• Compatible with potentiometer-based gear-position sensors
• Compatible with Hall-effect position sensors
• Compatible with variable-resistance sensors
• Sensor reference voltage supplied directly by the DX2
• No separate sensor controller or external reference-voltage supply required
• Standalone installation without an ECU or existing CAN Bus gear signal
• Configure and calibrate sensor ranges directly from its touchscreen
• Assign individual voltage or resistance ranges to each gear
• Display the calculated sequential gearbox position in real time

TUNER CAN Bus Tools Unlocked

• Live CAN Bus monitoring and recording
• CAN message filtering and ID isolation
• Real-time byte and bit monitoring
• Graph selected CAN Bus data
• Create completely custom CAN messages
• Configure CAN ID, data length and message bytes
• Send custom CAN messages once or transmit them continuously
• Configure custom-message transmission frequency
• Edit and retransmit captured CAN messages
• Save custom CAN messages inside vehicle profiles
• Configure supported CAN Bus communication speeds

OBD and UDS Discovery Unlocked

• Dedicated OBD and UDS discovery pages
• Create and send custom OBD and UDS diagnostic requests
• Configure request and response CAN IDs
• Configure the OBD service, PID or UDS data identifier
• Configure request data and transmission frequency
• Record vehicle diagnostic responses
• Automatically pair diagnostic requests and responses
• Reconstruct ISO-TP multi-frame messages
• Graph raw or calculated response data in real time
• Save successful requests directly into vehicle profiles
• Assign discovered values directly to gauges

Custom Profiles, Graphs and Data Export

• Create complete custom vehicle profiles
• Assign CAN, OBD and UDS data directly to gauges
• Select CAN IDs, bytes, bits and data length
• Configure signed and unsigned values
• Create custom multipliers, divisors and offsets
• Configure custom gauge titles, units and decimal precision
• Set custom minimum and maximum gauge ranges
• Create warning and alarm thresholds
• Create custom engine-data pages
• Record timestamped CAN, OBD and UDS logs
• Export recorded logs for analysis on a computer
• Import, export and share vehicle profiles

Programmable Analog Events and CAN Messages

• Create programmable events using the analog input
• Create custom analog-input thresholds and operating ranges
• Create visual and RGB LED alarms from analog-input conditions
• Create customised CAN messages triggered by analog-input events
• Transmit customised CAN messages when configured alarm conditions are activated
• Configure CAN IDs, message data, thresholds and event conditions directly from its touchscreen
• Save the complete analog-input and CAN-event configuration inside custom vehicle profiles

No computer is required for analog-input configuration. Sensor calibration, gear assignment, alarm conditions, event logic and customised CAN-message configuration are completed directly from its touchscreen.

Custom Branding

• Custom startup logo and splash screen
• Configurable colour themes
• Custom gauge titles and units
• Custom vehicle and profile names
• Vehicle-specific or builder-specific presentation

Requirements

• An existing DX2 with an active CORE licence
• The serial number of your DX2
• Basic knowledge of vehicle communication is recommended for TUNER tools

IMPORTANT:

• This complete upgrade already includes every DX2 PRO feature
• You do NOT need to purchase the CORE to PRO upgrade separately
• The upgrade does NOT guarantee compatibility with every vehicle or available data channel
• Custom CAN messages and vehicle profiles must be correctly configured and tested by the user
• Incorrect CAN or diagnostic messages can interfere with vehicle communication
• Analog-input events and transmitted CAN messages must be correctly tested before use

SimHub Support

SimHub support is included with DX2 CORE and does not require this paid upgrade. It is not available in firmware version 1.18 and will be added to all DX2 versions at no additional cost in the next DX2 firmware release.(available late 2026)

How the Upgrade Works

1. Purchase the DX2 CORE to TUNER complete software upgrade
2. Provide the serial number of your DX2
3. The permanent PRO and TUNER licences will be linked to your display
4. Follow the supplied instructions to install and activate the upgrade

After activation, DX2 TUNER remains completely standalone. A computer is not required to monitor data, create messages, configure diagnostic requests, calibrate sensors, build profiles, create analog events or assign values to gauges. All adjustments are completed directly from its touchscreen.

A computer is only optional when installing firmware updates or analysing exported logs.

The DX2 platform is under continuous development, with improvements, new tools, supported profiles and additional functionality introduced through future firmware releases.

This is a digital software upgrade. No physical product will be shipped.

Each upgrade is permanently linked to one registered DX2 and cannot be transferred to another display. Available engine data depends on the selected vehicle and installed profile.

CAN Bus transmission and message-alteration tools are intended for controlled development, testing and motorsport applications.